Shanhu Group
EN
GT Series Mine Truck
Mine Truck business was
established in 2008.
  • GT Series Mine Truck

GT Series Mine Truck

Features of GT Series Mine Truck

Excellent Performance
It adopts two-axis structure,the vehicle has a relatively small turning radius, thus increasing the mobility of the vehicle. The chassis of the vehicle is well adapted for use in the mine area and rough road conditions, where sharp road turns, slopes are frequent occurrences.

It is equipped with widened brake friction plates and dual-circuit braking system to ensure the reliability of heavy-duty downhill continuous braking and greatly shorten the braking distance of the vehicle. The four spring energy storage off-gas brakes ensure the safety of the parking brake when the truck is heavily loaded under complicated working conditions.


According to the needs of different working conditions, it can reasonably match the first-line low-speed, high-torque mine engines of WeiChai 375-420HP series and China Heavy Duty Trucks.

According to the output torque of each engine, the gearbox of different types of Faster heavy mining trucks can be reasonably matched to make the heavy trucks start smoothly and have strong climbing ability.

The eddy current retarder is assembled to ensure the stable speed of the vehicle at a constant speed, prolong the service life of the brake system, and effectively prevent brake failure and tire burst due to the high temperature of the hubs.

Strong Structure
The rigid vehicle frame is made of high quality steel plate used for making crossbeam.The longitudinal beam uses closed box-section, featuring high torsional strength, good rigidity and reliability.

The carriage is made of high-strength steel and wear-resistant plates, which is lightweight and wear-resistant, thus reducing the mass of the whole vehicle and increasing the load mass, enhancing the wear resistance of the carriage and reducing the impact of the stone on the carriage beam. The wear resistance is more than three times of the ordinary wear plate.

Adopting large speed ratio and the enhanced two-stage reduction drive axle, it has large bearing capacity and strong impact resistance.

According to the poor road conditions of the mine, the front bow adopts double steel plate damping, and the special steel plate seat is specially designed and manufactured.It is hard to be damaged in the case of high impact of the mine road.

With the four riding spring structure, there is no displacement and less maintenance in the complex mine which solves the problem of frequent displacement of the regular rear axle and improves the attendance rate.

Optimized Design
Efficient loading and unloading: The wide vehicle body design makes loading and unloading very easy. The use of large-flow gear pump shortens the lifting time,which in turn makes it convenient to unload the vehicle.

The oil bath type air filter uses the rapidly rotating airflow to bring the oil up, and uses the viscosity of the oil to absorb the impurities in the air, and the oil particles generated by the oil are adsorbed and intercepted by the steel filter element, and the air that removes impurities enters the paper filter for fine filtration, extending the life of the booster and engine.

Reusing the exhaust gas and acting on the cabin heating system can avoid the icing of the cabin floor under the cold, rain and snow conditions.

A comfortable cab
The cab is operated at one side and enjoys a good view. The air conditioning system is equipped with a good working environment.

The cab is equipped with an adjustable chair with airbags. A full-floating shock-reducing chair with double airbags can greatly reduce vibration caused by rough mine roads, thus greatly relieving the tiredness of the driver. The cab is equipped with a hydraulically-powered steering wheel (double-way assistance) of GY130BX large cylinder diameter, a hydraulically-controlled and air-assusted clutch. Easy steering and good control ability can greatly reduce the labor intensity of the driver.

The compartments are available in various forms and can be customized according to different working conditions.

The unique square rectangular compartment has a certain angle at the bottom. It adopts a five-span beam structure bottom plate and a reinforced column side slab. It is super-loaded, used together with medium and large excavators and loaders in high efficiency.

No fence
The slab-free compartment is suitable for the transportation of large stones with heavy impact and large wear on the carriage.

Low fence
The lower fence compartment is suitable for the transportation of small and medium-sized stones with light impact and small wear on the carriage. The compartment and small rear door can prevent leakage.

High fence
The high fence compartment is used for ordinary bulk cargo transportation, such as: coal mine, earthwork. The rear door is helpful for efficiently loading and prevents leakage.

GT Series Mine Truck Parameters Table:

Item

Parameters

GT-3500

GT-3600

Engine

Type

Heavy Truck WD10.380

Model

Water Cooled and 4 Strokes

Air Breathing

Turbocharged Intercooler

Number of Cylinders

6

Stroke×Bore

126mm×130mm

155mm×126mm

Rated Power

276kW

Rated Speed

2000r/min

Maximum Torque

1500N·m

Fuel System

Direct-Injection


Lubrication System

Lubrication Method

Gear Pumps,Compulsive Lubricating

Filter

Full Flow

Air Filter

Four-stage filtration (cyclone dry, with double filter and strainer, oil filter)

Dry, with double filter and strainer, oil filter plus dust indicator

Transmission

Type

6DS150TA

Transmission

Shanxi Fast Gear Co., Ltd.

Speed Range

6 Forward Gears, 1 Reverse Gear

Speed Ratio

8.43/1 Gear, 7.5/R Gear

Maximum Speed

50km/h

Axle

Front Axle

Pengxiang 19-ton welding bridge

Meritor 25-ton welding bridge

Rear Axle

Pengxiang 35-ton reinforced welding bridge

Meritor 40-ton reinforced welding bridge

Rear Axle Reduction Model

Wheel Speed Reduction & Main Reducer

Rear Axle Total Speed Ratio

12.82

15.12

Suspension Device

Reinforced leaf spring suspension, rear axle single side assembly 4 riding bolt

Steering System

Model

Hydraulic power steering with steering assist

Auxiliary

¢70 Bore Booster Cylinder

Minimum Turning Radius

9.5m

Cab

Skeleton skinned large flat unilateral reinforced mining vehicle special cab

Frame

Model

Isometric box type rigid frame

Main Frame Material

700 beam special steel plate

Brake

Travel brake

front

Air control, drum brake

Air control, drum brake

Rear

Air control, drum brake, electric eddy current retarder, auxiliary brake

Air control, drum brake, electric eddy current retarder, auxiliary brake

Parking Brake

Spring energy storage brake

Emergency Brake

Eddy Current Retarder

RZ3000

RZ3000

Truck Compartment

Normal Hopper

Paperback

28m³

Stacking

32m³

Maximum Vehicle Weight

73000kg

Maximum Load Weight

50000kg

Car Form

Rectangular square compartment with upturned tail

Material Thickness

Bottom Surface (Double Layer)

10mm+10mm

12mm+10mm

Front

10mm

Side

Car Volume (L×W×H)

5400mm×3230mm×1600mm

5470mm×3220mm×1600mm

Hopper Material

NM450

Hydraulic System

Lifting Cylinder Type

Front multi-stage single cylinder hydraulic lift

Hydraulic Pump Displacement

100mL/r

Lifting Time

22sec.

18sec.

Weight Distribution(Load)

Front Axle

33%

Rear Axle

67%

Tire (Normal)

Front and Rear

16.00-25/16.00R25

Maintenance Amount

Coolant

40L

Fuel Tank

380L

Motor Oil

22L

Transmission

12L

Hydraulic Oil

70L

Rear Axle Reducer and Wheel Side

32L

Difference

/

1.Ptional Weichai 420 horsepower engine, 7DS gearbox.
2.The axle load capacity is stronger.
3.The car volume is 3m³ larger.
4.The tire is a spokeless rim (steel ring).





Related Products

GT Series Mine Truck

News

What's new



Leave a Message







Contact Us