Shanhu Group
EN

What is Cone Crusher?

The cone crusher equipment is an advanced hydraulic crusher with high power, large crushing ratio and high productivity. The equipment was developed on the basis of digesting and absorbing various types of cone crushers of various countries in the 1980s. It is clearly different in design from the structure of a conventional cone crusher and concentrates on the main advantages of the various types of cone crushers known to date. Suitable for fine crushing and ultra-fine crushing of hard rock, ore, slag, refractory materials, etc.

Cone crusher is widely used in mining industry, metallurgical industry, construction industry, road construction industry, chemical industry and silicate industry. It is suitable for crushing hard and medium hard ore and rock, such as iron ore, limestone, copper ore, quartz. , granite, sandstone, etc. Used in the medium and fine crushing of various ores and rocks with a Platt hardness of f ≤ 5-16. The structure of the crusher consists of main parts such as frame body, adjusting device, adjusting sleeve, crushing cone, transmission and eccentric sleeve, and auxiliary parts such as electric and lubrication.

The cone crusher is divided into three types: coarse crusher cone crusher, medium crush cone crusher and fine crusher cone crusher. It is suitable for crushing various ores and rocks with medium hardness. The type of crushing chamber is determined by the use of ore, the standard type is used for medium crushing; the medium type is suitable for medium and fine crushing; the short head type is suitable for fine crushing. The cone crusher is crushed by the material layer, and the material block is subjected to all-around extrusion, and the impact between the material layers and the impact orientation of the moving cone on the material are generated. The material has a certain degree of compactness and satisfies the requirement of gradually increasing the crushing force so that the crusher achieves selective crushing to a large extent. If the traditional cone crusher can use the rotary distributor, the correct control of the feed can also achieve selective crushing to a certain extent.

Related News
  • What is Crushing Process?

    What is Crushing Process?

    November 30, 2018In mineral processing or metallurgy, the first stage of tensile compression is crushing. Depending on the type of rock to break, the process involves two very different techniques. In general, operato...view
  • What is a Vertical Shaft Impact Crusher?

    What is a Vertical Shaft Impact Crusher?

    November 30, 2018The vertical shaft impact crusher is a kind of rock crushing equipment. It has been used since 1980s. It has the characteristics of stable and reliable operation, convenient maintenance and high sand ...view
  • What is Impact Crusher?

    What is Impact Crusher?

    November 24, 2018Impact crusher referred to as impact crusher, commonly known as sand making machine, is a kind of high-energy and low-impact shock with international advanced level. Its performance plays an irreplace...view
  • What is Jaw Crusher?

    What is Jaw Crusher?

    November 24, 2018The jaw crusher is mainly used as a coarse crusher and a medium crusher in mining, building materials and infrastructure. According to the width of the feed port, it is divided into three types: large...view
  • Cone Crusher Common Fault

    Cone Crusher Common Fault

    November 24, 2018Common malfunctions of Cone CrusherFault 1: The oil pressure in the oil pipe before and after the filter is differentCause of the malfunction: the filter is cloggedTrouble-shooting: When the oil press...view
Contact Us