For 100tph, there are three recommended equipment in Shanhu, namely PEX-300*1300, PE-500*750 and PE-600*900 jaw crushers. In addition, there are three types, including SH160-D hollow cone crusher, SH250-D hollow cone crusher and SY300D hollow cone crusher.
A brief introduction to PE jaw crusher
The PE series jaw crusher runs the movable jaw according to a predetermined trajectory by means of the rotation of the eccentric shaft, so that the material entering the crushing chamber composed of the fixed plate, the movable plate and the guard plate is continuously crushed by the action of collision. The broken material is discharged from the bottom of the crushing chamber.
A brief introduction to SH cone crusher
The SH series cone crusher drives the eccentric bush to rotate by the driving part and the transmission part. The core of the crushing cone is rotated under the eccentric bush. It periodically approaches or leaves the fixed cone, so that the material entering the crushing chamber is continuously crushed. Then the broken material will be discharged from the bottom of the crushing chamber. The yield is higher and sheet rate is lower. It is ideal for secondary and tertiary crushing.
Introduction to SY cone crusher
SY series multi-cylinder hydraulic cone crusher, hydraulic safety cylinder overload protection, cavity clearance. The mechanical, electrical and hydraulic integrated design ensures the advanced performance. The crusher's core is below. It is close to or far from the fixed cone in a certain period so that the material entering the crushing chamber can be broken, and then the crushed material can be discharged from the bottom of the crushing chamber. This method has high yield and low sheet rate, and is suitable for the second and third material crushing.