Shanhu Group



Jaw crusher:
PE series
PEX-300*1300 and PE-750*1060

Cone crusher:
SH series
SH160-B with F&M cavity, SH160-D with F&M&C cavity and SH250-D with F cavity
SY series
SY300D with M cavity

A brief introduction to PE jaw crusher

By rotating the eccentric shaft on a predetermined track, the PE series jaw crusher can operate the movable jaw plate. Then into the broken chamber, the broken cavity is mainly composed of three parts: fixed plate, movable plate and protective plate. The material can be continuously crushed in the crushing chamber. By colliding, the broken material can emerge from the bottom of the chamber.

A brief introduction to SH cone crusher

The SH series cone crusher drives the eccentric sleeve to rotate by the driving portion and the driving portion. The core of the broken cone rotates under the eccentric bushing. It periodically approaches or leaves the fixed cone, causing the material entering the chamber to be constantly crushed. The broken material will then be discharged from the bottom of the chamber with high yield and low yield. It is ideal for secondary crushing and tertiary crushing.

Introduction to SY cone crusher

SY series multiple cylinder hydraulic cone crusher, which is overload protected and cavity cleared by hydraulic safety cylinder. Integrated design of machine, electricity and liquid ensures advanced performance. The core of the crushing cone is rotated under the eccentric bush. It periodically approaches or leaves the fixed cone, so that the material entering the crushing chamber is continuously crushed. Then the broken material will be discharged from the bottom of the crushing chamber. Adopting the inter particle crushing principle, the yield is higher with lower sheet rate. It is ideal for secondary and tertiary crushing.

Contact Us