Shanhu Group
EN

250tph

For primary crushing system, PE series jaw crusher can meet the standard. It has a large capacity ranging from 35 to 1485 TPH.
For the secondary crushing system, there are three kinds of crushers which can meet the crushing requirements. They are SH series cone crusher, SY series multi-cylinder hydraulic cone crusher and H series single-cylinder hydraulic cone crusher, all of which can reach 250 tph.
SC-800 is the best choice for three-stage crushing system. It can reach 250 TPH and get good shape.

A brief introduction to PE jaw crusher    

By rotating the eccentric shaft on a predetermined track, the PE series jaw crusher can operate the movable jaw plate. Then into the broken chamber, the broken cavity is mainly composed of three parts: fixed plate, movable plate and protective plate. The material can be continuously crushed in the crushing chamber. By colliding, the broken material can emerge from the bottom of the chamber.

A brief introduction to SH cone crusher   

The SH series cone crusher drives the eccentric bush to rotate by the driving part and the transmission part. The core of the crushing cone is rotated under the eccentric bush. It periodically approaches or leaves the fixed cone, so that the material entering the crushing chamber is continuously crushed. Then the broken material will be discharged from the bottom of the crushing chamber. The yield is higher and sheet rate is lower. It is ideal for secondary and tertiary crushing. 

A brief introduction to SY cone crusher      

SY series multi-cylinder hydraulic cone crusher, hydraulic safety cylinder overload protection, cavity clearance. The mechanical, electrical and hydraulic integrated design ensures the advanced performance. The crusher's core is below. It is close to or far from the fixed cone in a certain period so that the material entering the crushing chamber can be broken, and then the crushed material can be discharged from the bottom of the crushing chamber. This method has high yield and low sheet rate, and is suitable for the second and third material crushing.

A brief introduction to H cone crusher    

The Hercules single-cylinder hydraulic cone crusher adopts an advanced compact design and is easy to use and maintain. The single-cylinder hydraulic cone crusher adopts the intergranular crushing principle and is suitable for the production of high-standard building aggregates. The Hercules single-cylinder hydraulic cone crusher is suitable for secondary and tertiary crushing.

A brief introduction to SC impact crusher    

SC series impact crusher adopts the principle of intergranular crushing. In the process of natural falling, material collides with material accelerated by impeller under the action of high-speed centrifugal force, resulting in high-speed impact and high-density crushing. It will form multiple strikes, friction, impact, and then drain directly from the lower part.

Contact Us