For the secondary crushing system, there are three kinds of crushers which can meet the crushing requirements. They are SH series cone crusher, SY series multi-cylinder hydraulic cone crusher and H series single-cylinder hydraulic cone crusher, all of which can reach 300 tph.
SC-800 is the best choice for three-stage crushing system. It can reach 300 TPH and get good shape.
When it comes to sieve feeding system, Shanhu has two solutions, including SHW series vibration feeder and SZF series vibration sieve.
SH250-B with M&C cavity
SH400-D with F&M cavity
SY300 with M&C cavity
SY600D with F&M cavity
H680 with M&MC&C cavity
S760 with EC&C cavity
A brief introduction to SH cone crusher
SH series cone crusher can drive eccentric sleeve to rotate by driving part and transmission part. The crusher's core is below. It is close to or far from the fixed cone in a certain period so that the material entering the crushing chamber can be broken, and then the crushed material can be discharged from the bottom of the crushing chamber. This method has high yield and low sheet rate, and is suitable for the second and third material crushing.
A brief introduction to SY cone crusher
SY series multi-cylinder hydraulic cone crusher, hydraulic safety cylinder overload protection, cavity clearance. The mechanical, electrical and hydraulic integrated design ensures the advanced performance. The crusher's core is below. It is close to or far from the fixed cone in a certain period so that the material entering the crushing chamber can be broken, and then the crushed material can be discharged from the bottom of the crushing chamber. This method has high yield and low sheet rate, and is suitable for the second and third material crushing.
A brief introduction to S&H cone crusher
H-type single cylinder hydraulic cone crusher has the advantages of advanced design, compact operation and convenient maintenance. And it uses the principle of inter-granular crushing, so it can be used in the production of high-standard building aggregate. Similarly, it is also an ideal machine for secondary and tertiary crushing.
A brief introduction to SC impact crusher
SC series impact crusher also adopts the principle of intergranular crushing. The working principle is as follows: in the process of free falling, under the action of high-speed centrifugal force, the material will collide with the impeller, which will produce high-speed impact and high-density crushing, and eventually form multiple strikes, friction, crushing, and then discharge directly from the lower part.
A brief introduction to SZF vibrating screen
Shanhu SZF double-axis vibration screen is a new type of vibration screening equipment, which was originated in Shanhu Company and has a national invention patent. Its drive mainly depends on motor. In order to ensure the synchronization of the two pairs of vertebral gears, universal joints are needed to link them. The working principle is to vibrate the screen box by driving two eccentric mass actuators with soft coupling. The trajectory of the screen box is elliptical.
Introduction to SHW vibrating feeder
SHW series two-axis vibration feeder mainly consists of two parts, one is herringbone gear, the other is a cylinder block and side plate. The working principle is to generate power through a rotating motor, which makes the spring rotate periodically. Make the trough vibrate and tilt, so that the material can move downward along the trough, and finally achieve the purpose of feeding.